当浪涌电压发生时，浪涌保护器立即断开电源。这种 电涌保护器 is particularly intelligent, complex, and naturally more expensive, and is generally rarely used. This kind of 电涌保护器 is generally made of current sensor. The composition of the control board and the lock. The purpose of the current sensor is to detect whether the grid voltage has fluctuations in the 电涌保护器. When the control board loads the surge voltage data signal of the current sensor, the lock is operated immediately, as the conduction of the actuator control circuit. There is another 电涌保护器 electrical circuit, which does not disconnect the power circuit when the 电涌保护器 is generated, but embeds the surge voltage, digesting and absorbing the kinetic energy of the 电涌保护器. This type of circuit is usually placed inside a circuit board, such as a switching power supply circuit. Surge protector class 1. Cross-border marketing is between the live wire and the neutral wire, that is, the differential mode suppression power circuit. The second and third level jumpers of the 电涌保护器 are the live wire neutral-to-ground and the neutral-to-ground, that is, common mode suppression. Differential mode 电涌保护器s are used to embed, digest and absorb surge voltages between live and neutral. Likewise, common mode 电涌保护器s are also used to embed live-neutral-to-ground surge voltages. Generally speaking, for 电涌保护器s with lower requirements, the assembly of 电涌保护器s is sufficient, but common mode surge protection must be added in some places with stronger regulations.

---

发帖时间： Jul-02-2022